Chapter contents:
2.1 General safety information
Qualified personnel
| DANGER | |
|
The unit must only be installed and serviced by a proven electrican specialist, in accordance of all relevant regulations, safety and accident prevention directives of the country. Be sure that the existing mains voltage corresponds with the specified operating voltage before operating the device. Risk of electric shock. Do not operate the device without a cover. Even when switched off, voltage may be present at the outputs. When working on the device or connected loads, always disconnect the upstream fuse from the power supply. Apply the "Five Safety Rules" (DIN VDE 0105, EN 50110):
Only install the device in places with a good ventilation and without humidity or high temperatures. Do not expose the unit to rain or snow. Do not operate the unit near heat sources, e.g. radiators. If any of the following occurs, do not operate the device without first checking it:
For cleaning only use a dry, soft cloth, by no means liquids. |
Working on electrical installations
| WARNING | |
|
|
Dangerous voltages in live installations, cables, plugs ... |
Device-specific notes
| WARNING | |
|
|
There is a risk of dangerous voltages being applied to the device (DALI, not SELV). If a person touches live parts, an electric shock can cause serious injury or even death. |
| WARNING | |
|
|
For your own safety, read all instructions and information in this manual carefully before initial operation. Keep this manual for future reference. The instructions are an integral part of the product and must be handed to the end customer. All information and instructions in this manual must be observed completely and in detail. The manufactuer is not responsible for any direct or consequential damage that results from disregarding any information in this manual. |
In accordance with European Directive 2002/96/EC (it`s) not longer usable electronic devices and defective or used batteries (European Directive 2006/66EG) must collected separately and disposed by an environmentally sound recycling.
This symbol indicates that electrical and electronic equipment must be disposed of separately from normal waste at the end of its operational lifetime.
Should these product are no longer be useable, the user is required by law to dispose of old appliances separately from their household waste e. g. at a local authority collection point or recycling center.
The devices comply with the EU directives applicable at the time they are placed on the market.
2.2 Intended use
The dimmer supports control via button input (PushButton Input) and via Casambi.
| Module Version | Installation location | Description |
|---|---|---|
| UP | flush mouted | for installation in deep switch boxes or junction boxes |
- operation according to the listed technical data
- installation in dry indoor areas
- use with the connection options available on the device
| NOTE | |
|
Intended use also includes compliance with all information in this user information. |
| NOTE | |
|
|
Please note that previous versions of the product may differ in terms of programming, operation and behaviour or that not all functions described here are supported! 1. Check the supported device version in this manual (this user information) with the version indicated on the device sticker. The version information can be found on the bottom right of the device sticker:
2. if the version of your device does not match the version supported in the manual, obtain the relevant manual and follow the instructions there. |
2.3 Not-intended use
- Any unauthorised modifications to the construction
- Repairs
- Use in outdoor areas
- Use in wet rooms
MTC maintronic GmbH is not liable for damage caused by improper use of the device. The user/operator is solely responsible for this risk.
