Chapter contents:
1.1 Applicable documents
Please refer to this document in partial instructions (such as installation instructions).
1.2 Usage
Please note that earlier versions of the product may differ in programming, operation and behavior and may not support all the features described here.
Before installation, commissioning and operation, read this manual and pay attention to the warnings for safe handling, which are marked as follows:
1.3 Safety information
| DANGER | |
|
The signal word "DANGER" indicates an imminent danger. If not avoided, death or serious injury will result. |
| WARNING | |
|
|
The signal word "WARNING" indicates a possibly imminent danger. If it is not avoided, death or very serious injuries may result. |
| CAUTION | |
|
|
The signal word "CAUTION" indicates a possibly imminent danger. If it is not avoided, slight or minor injuries may result. |
| CAUTION | |
|
The signal word "CAUTION" indicates a situation that can lead to material damage. Either to the product itself or to other objects in the environment. |
| NOTE | |
|
The signal word "NOTE" indicates tips and recommendations to help you get the most out of the product. |
1.5 Used symbols
| Icon | Description |
|---|---|
| The number indicates the number of output channels of the device |
| The number indicates the number of equipped push-button inputs |
| Max. output current per channel |
| Dimmed channel |
| LED dimmer |
| RGB+W color mixing |
| Dims RLC loads R = resistive loads |
| Zero-cross switch - Device powers up or down by zero crossing of the sinewave |
| Weight in gramm |
| Temperature ambient (ta) |
| Temperature critical (tc) |
| Powersupply AC - the voltage details either refer to a fixed voltage or a work ce e.g. 100 to 240 V AC |
| Powersupply DC - the voltage details either refer to a fixed voltage or a working range e.g. +10 to 24 V DC |
| Powersupply DC - battery possible |
| Powersupply - powered from DALI |
| The number indicates how much space (in TE) the device takes up on a DIN rail |
| Flush mouted housing - in installation boxes or in devices of protection class II |
| Installation housing - installation in ceiling, wall or luminaire |
| NOTE | |
|
|
The symbols explained here show the technical data of the devices. These symbols can be found in the technical documentation of the respective device. |
| Icon | Description |
|---|---|
| Astro function - control scenes through sunrise and sunset |
| Group devices - create groups for joint control |
| Logical inverting of channels. e.g. for a blind up - down or CH1 and CH2 |
| Timer function - execute time-controlled automated functions |
| Scene control - save individual fixed images as scenes or create a chaser with an animation |
| Type of protection |
| Protection class II - protection throught double insulation |
| Protection class III - protection throught supplied from a seperated extra-low-voltage |
| Wireless protocol Casambi |
| DALI protocol interface |
| DALI protocol interface with device type 6 |
| DMX protocol interface |
| DMX protocol interface with RDM |
| RS485 interface |
| Push-button input on mains voltage 230V AC |
| Push-button input |
| Wireless push-button input |
| Wireless controll |
| Wireless controll with gateway / repeater function |
| Rollers and blinds function |
| changeover relay Number indicates the amount of relays |
| Switch Relay (normally open contact) Number indicates the amount of relays and 16A the switch current of the relay |
 | Relay with high inrush current - current peaks up to 165A for 20mS |
1.6 Storage
The devices must be protected from dust, moisture, splashing and dripping water.
1.7 Warranty and liability
The rights to any third-party company names, brands, trademarks or logos mentioned are the property of their respective owners.
1.8 Service and support
If you need special support beyond the information provided here, contact your distributor or the address in the Manufacturer Contact section. Contact details
1.9 Disposal
In accordance with European Directive 2002/96/EC (it`s) not longer usable electronic devices and defective or used batteries (European Directive 2006/66EG) must collected separately and disposed by an environmentally sound recycling.
This symbol indicates that electrical and electronic equipment must be disposed of separately from normal waste at the end of its operational lifetime.
Should these product are no longer be useable, the user is required by law to dispose of old appliances separately from their household waste e.g. at a local authority collection point or recycling center.
